Bay Networks 5399 Manual page 223

CallDef_rs232_async_
parity
CallDef_rs232_async_
stop_bits
CallDef_rs232_sync_
clock_source
CallDef_short _ break
defines the parity type for asynchronous connections.
Type
RAC
Values
none, odd, even
Default
none
Lists
RAC Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
specifies the number of stop bits for an asynchronous connection.
Type
RAC
Values
one, two, one-and-half
Default
one
Lists
RAC Only, Basic Async Port, Modem, Modem Internal,
Call Defaults
defines the source of the bit rate clock for the connection.
transmit clock is internal and the receive clock is external.
Type
RAC
Values
clk56, clk64, clk112, clk128, external, split
Default
clk56
Lists RAC Only, Call Defaults
allows a RAC or an ISDN Primary Rate RAC to return a user to the CLI prompt
after receiving a break of less than two seconds.
Type RAC
Values enabled or disabled
Default enabled
Lists RAC Only, Idle Timer, Call Defaults
Managing Remote Access Concentrators Using Annex Manager
Appendix A RAC Parameters
indicates that the
Split
A-33