Bay Networks 5399 Manual page 201

CallDef_authorized_
groups
CallDef_backward_key
CallDef_banner
CallDef_broadcast_
direction
specifies the LAT protocol remote group codes that are accessible to users on a
RAC or an ISDN Primary Rate RAC. You can enter
separated by commas (e.g.,
(e.g., ).
1, 5, 200-255
Type
RAC
Values
all, none, numbers between 0 and 255
Default none
Lists RAC Only, LAT, Call Defaults
defines the character sequence that opens the next lower-numbered session
established through a call to a RAC or an ISDN Primary Rate RAC. Bay
Networks recommends that you use a sequence with
displays as ^. If you use more than one letter or number, Annex Manager
separates characters with a slash (/). For example,
+ + , displays as
a b
Ctrl
Type
RAC
Values
0 to 16 characters
Default
" " (null string)
Lists
RAC Only, VCI Interface, Call Defaults
controls whether the ISDN Primary Rate RAC banner and message-of-the-
day are displayed on CLI connections.
Type
RAC
Values
enabled or disabled
Default
enabled
Lists
RAC Only, Basic Async Port, Call Defaults
controls the direction in which a RAC or an ISDN Primary Rate RAC sends an
administrative broadcast message. When you choose
Rate RAC sends a message from the network side of the connection. If you
choose , it sends a message from the port side. You can use this parameter
port
only when the
CallDef_mode
Type RAC
Values port or network
Default port
Lists RAC Only, Basic Async Port, Modem, Call Defaults
Managing Remote Access Concentrators Using Annex Manager
, , ) or a range of numbers separated by dashes
1 5 7
.
^a/b
parameter is set to
slave
Appendix A RAC Parameters
, , a series of numbers
all none
+ a character. The key
Ctrl
, the ISDN Primary
network
.
A-11