Bay Networks 5399 Manual page 246

Appendix A RAC Parameters
line_erase
load_broadcast
load_dump_gateway
Managing Remote Access Concentrators Using Annex Manager
A-56
allows a RAC using CLI to echo line erase for a video terminal. If you choose
, the RAC erases all characters on the line and moves the cursor back to
enabled
the beginning of the line. If you choose
for hard-copy terminals, making the deleted line visible and positioning the print
head at the beginning of the next line.
Type
Async
Values enabled or disabled
Default enabled
Lists Async Port, Command Line Editing
defines, during a boot, whether the RAC requests the configuration or message-
of-the-day files from other hosts. This parameter works only if the files are not
available on the preferred load host.
Type RAC
Values enabled or disabled
Default enabled
Lists RAC Only, Basic_RAC
specifies the gateway IP address. A gateway is required if the preferred load or
dump host is on a different network or subnet than the RAC.
Type RAC
Values IP address
Default
0.0.0.0 (no gateway)
Lists
RAC Only, Basic RAC
, it echoes the line erase character
disabled