Procedure Job Aid: Sfp Models With Ddi - Nortel 5510 Installation Manual

CWDM SFPS are also supported. CWDM technology consolidates
multiple optical channels on a common optical fiber. CWDM uses multiple
wavelengths to expand available bandwidth.
CWDM SFPs are designed to support high speed data communications
for Metropolitan Area Networks (MANs). The system uses a grid of eight
CWDM optical wavelengths in both ring and point-to-point configurations.
All components are color-coded by wavelength.
The attainable cable length can vary depending on the quality of the fiber optic
cable used.
SFP models without DDI support
Model and connector
1000BASE-SX (LC)
1000BASE-SX (MT-RJ)
1000BASE-LX (LC)
1000BASE-XD CWDM (LC)
1000BASE-ZX CWDM (LC)
For specifications for these SFPs, see

Procedure job aid: SFP models with DDI

Any Digital Diagnostic Indicating (DDI) SFP can be used in any Ethernet
Routing Switch module that supports SFPs. The optical functions of the
SFP are supported. Access to the DDI information will be provided in
a future release.
The SFPs described in this section are all RoHS -E6 compliant.
Copyright © 2007, Nortel Networks
.
ATTENTION
Product number
AA1419013-E5
AA1419014-E5
AA1419015-E5
AA1419025-E5 to
AA1419032-E5
AA1419033-E5 to
AA1419040-E5
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
Selecting an SFP 19
Description
850 nanometers (nm), up to 275
or 550 m
850 nm, up to 275 or 550 m
1310 nm, up to 10 km
1470 nm to 1610 nm, up to 40 km
1470 nm to 1610 nm, up to 70 km
"SFP specifications" (page 23).