1000Base-Sx (Mt-Rj) Sfp Specifications; 1000Base-Lx Sfp Specifications - Nortel 5510 Installation Manual

26 SFP specifications
1000BASE-SX (MT-RJ) SFP specifications
The 1000BASE-SX (MT-RJ type) SFP provides Gigabit Ethernet connectivity
using MT-RJ multimode fiber connectors. The following table describes
standards, connectors, cabling, and distance for the 1000BASE-SX (MT-RJ
type) SFP. The part number for this model is AA1419014-E5.
IEEE 802.3z 1000BASE-SX (MT-RJ) SFP specifications
Parameter
Connectors
Cabling
Distance
Wavelength
Link optical power budget
Laser characteristics
Launch power
Receiver characteristics
Receiver sensitivity
Maximum input power
1000BASE-LX SFP specifications
The 1000BASE-LX SFP provides 1000BASE-LX Gigabit Ethernet
connectivity at 1310 nanometers (nm) using single mode or multimode
optical fiber. The 1000BASE-LX SFP supports full-duplex operation only.
The part number for this model is AA1419015-E5.
The following table describes standards, connectors, cabling, and distance
for the 1000BASE-LX SFP.
IEEE 802.3z 1000BASE-LX SFP specifications
Parameter
Connectors
Cabling
Distance
Copyright © 2007, Nortel Networks
.
Specifications
Duplex MT-RJ
•
•
•
•
850 nm
7.0 dB
-10 to -4.0 dBm
-17 dBm
0 dBm
Specifications
Duplex LC
•
•
•
•
•
Nortel Ethernet Routing Switch 5500 Series
Installation — SFPs
NN47200-302 03.01 Standard
5.1 27 August 2007
62.5 µm MMF optic cable
50 µm MMF optic cable
up to 275 m using 62.5 µm MMF optic cable
up to 550 m using 50 µm MMF optic cable
50 micrometer (µm) multimode fiber (MMF)
62.5 µm multimode fiber
9 µm single mode fiber (SMF)
Up to 550 meters (m) using MMF
Up to 10 kilometers (km) using SMF