Table of Contents
Advertisement
1.3 Returning Chair to Packaged
Configuration
TOP PREVIOUS NEXT
When shipped from the factory, for efficient transport, the chair is packaged in the configuration
shown in the figure on page 2.
After competing the initial operating settings of page 2, if the chair is to be returned to the packaged
configuration, please follow the following instructions.
(1) Insert the plug into the outlet, and check that the power switch is [On].
(2) While pushing down on the link release lever, please push (continuously) the
button of the operation panel. After checking that the leg rest has not extended, remove your hand
fromthe link release lever.
* When wanting to use the chair once again, please follow the directions on page 2 for initializing
operating settings.
Advertisement
Table of Contents
