Table of Contents
Advertisement
15.7.1 Assembling the oval gear
TOP PREVIOUS NEXT
1. Put a V mark on the side of the oval gear of drive pipe block as shown in the left Figure.
2. Put a mark as shown in the left Figure on the side of the oval gear of intermediate gear block.
3. Arrange aside the V mark of oval gear of drive pipe block, and assemble in the gear box.
4. Alinging the mark of oval gear of intermediate gear block with the V mark of oval gear of
drive pipe block as shown in the center Figure, insert the intermediate shaft of intermediate
gear block into the groove A of gear box.
*When aligning the drive pipe block oval gear and intermediate gear block, smooth rotation will not
be possible even if the alignment is off by just one tooth. During rotation, the gears will not match up,
and may cause the massager tolock. Please align the gears correctly.
Advertisement
Table of Contents
