Table of Contents
Advertisement
1.1 When Chair Arrives:
TOP PREVIOUS NEXT
When shipped from the factory, for efficient transport, the chair is packaged in the configuration
shown in the drawing below. In this configuration, normal reclining motion is not possible. Therefore,
upon arrival of the chair, always follow thefollowing steps to initialize operating settings.
*Check that the power switch is [On] (found at the back of the hinge cover).
(1)Plug-In
(2)Push continuously the reclining button of the operation panel to raise the seatback.
(3) Continue the process until the seatback movement comes to a stop (a clink sound should be
audible)./•The reclining mechanism is set.
Advertisement
Table of Contents
