2.2.2
Mark drill holes
2.2.3
Secure mounting bracket
3. Remove the screw located at the middle cover by using a
Torx T20 screwdriver.
4. Remove the middle cover.
The EVSE is a stationary wall-mounted equipment. Using the
template to mark the screw locations for the mounting bracket
and cable holder (optional).
1.
The cable holder is optional and depicted in the figure for
demonstration
purposes.
recommended bolt types:
Masonry walls: 1/4" expansion bolts.
Torque: 8.8 N·m (78 lb·in)
Finished walls supported by wood studs: #8 wood
screws of 2" or above screw length.
Torque: 3 N·m (26 lb·in)
11
v1.0.3
The
following
are