Specifications - Delta AC MAX Installation And Operation Manual

6

Specifications

Model
Input
Nominal Current
Grid Connection
AC Voltage
Frequency
Grounding systems
Terminal
Protection
Standby Power
Charging Output
Nominal Power
Nominal Current
Connector Type
Charging Voltage
Cable Length
Protection
Compliance
User Interface
Display
Authentication
Charger Configuration
Network Interface
Bluetooth
Protocols and Applications
RS485
Protocols and Applications
Mechanical Properties
Ingress Protection (IEC 60529)
Impact Protection (IEC 62262)
Cooling
Dimensions* (W x H x D)
Weight*
Environmental Conditions
Operating Temperature Range
Storage Temperature Range
Humidity
Altitude
Compliance
EU Low Voltage Directive
EU EMI Directive
AC MAX Basic
3.7 kW / 11 kW
16 A
Single-phase electric power (L1, N, PE)
Three-phase electric power (L1, L2, L3, N, PE)
All AC MAX BASIC models support both, single phase and three phase
installations
230 V / 400 V
50 Hz / 60 Hz
TN, TT, IT
PCB terminal block
Over current, Under voltage, Over voltage, Over temperature, Surge
protection, Short circuit, Ground fault
3.6 W
Single-phase: 3.7 kW
Three-phase: 11 kW
16 A per phase
AC Type 2 Plug
230 V / 400 V
5 m (models with AC Type 2 Plug charging interface)
RCD Type A (AC 30 mA)
RDC-DD (DC 6 mA)
IEC 61851-1, IEC 62196-2, IEC61008-1, IEC 62955
Status LED, 4 colors
Key switch
Maximum charging current selectable by 8-step hardware DIP switch
Configuration, control, monitoring and firmware update
ModBus RTU for energy management
IP55
IK09
Natural convection
218 x 371 x 167 mm ( 8.6 x 14.6 x 6.6 inch)
6.0 kg (13.3 lbs), including charging cable
- 30 ºC to + 50 ºC (- 22 ºF to + 122 ºF)
- 40 ºC to + 80 ºC (- 40 ºF to + 176 ºF)
< 95 % relative humidity, non-condensing
Up to 2,000 m (6,500 ft.)
IEC 61851-1, IEC 62479
EN 61000-3-11 / -12, IEC 61851-21-2
25
7.4 kW / 22 kW
32 A
Single-phase: 7.4 kW
Three-phase: 22 kW
32 A per phase
AC Type 2 Plug
AC Type 2 Socket
AC Type 2S Socket
v1.0.3