Table of Contents
Advertisement
Table 4: VPNremote for 4600 Series IP Telephones Customizable System
Parameters (continued)
Parameter Name
NVBACKUPSGIP
NVVPNUSER
NVVPNPSWDTYPE
Default Value
" " (Null)
" " (Null)
1
Description and Value Range
This is the back up IP address or the back up
fully qualified domain name of the Avaya
Security Gateway (SG). A maximum of 4
back-up security gateways can be
configured.
Enter the value in dotted decimal format or
DNS name format. Valid values are zero or
more IP Addresses in dotted-decimal or DNS
name format, separated by commas without
any intervening spaces (0 to 255 ASCII
characters, including commas). Null ("") is a
valid value, but the value may not contain
spaces.
This value cannot be more than 24
characters.
This is the user name to be used during
authentication and VPN tunnel setup.
Each VPNremote Phone should be
configured with a unique user name. A
unique user name can be configured during
the initial VPN setup.
This value range is up to 24 ASCII
characters.
Controls the type of VPN passwords. Valid
value is one ASCII numeric digit, 1 to 4.
Values are:
1 = The password is saved in non-volatile
memory.
2 = The password is erased when you turn off
power to the telephone.
3 = The password is all numeric and is for
one-time-use only.
4 = The password is alpha-numeric and is for
one-time-use only.
Issue 1 December 2005
3 of 4
27
Advertisement
Table of Contents
