Copper Ethernet Port Specifications; Operating Environment; Mechanical Specifications - Siemens SIMATIC NET RUGGEDCOM RS930L Installation Manual

Technical Specifications
5.4 Copper Ethernet Port Specifications
Standard
IEEE 802.3z
IEEE 802.3ab
IEEE 802.1D
IEEE 802.1Q
IEEE 802.1p
5.4

Copper Ethernet Port Specifications

The following details the specifications for copper Ethernet ports that can be ordered
with the RUGGEDCOM RS930L.
Speed
Connector
Duplex
Cable Type
Wiring Standard
Maximum Distance
Isolation
a
Auto-negotiating.
b
Shielded or unshielded.
c
Auto-crossover and auto-polarity.
d
Typical distance. Dependent on the number of connectors and splices.
e
RMS 1 minute.
5.5

Operating Environment

The RUGGEDCOM RS930L is rated to operate under the following environmental
conditions.
Ambient Operating
Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
a
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
b
Non-condensing.
5.6

Mechanical Specifications

Weight
26
10 Mbps
Ports
Ÿ
Ÿ
Ÿ
a
10/100Base-TX
RJ45
a
FDX/HDX
b
> CAT 5
c
TIA/EIA T568A/B
d
100 m (328 ft)
e
2.5 kV
a
b
100 Mbps 1000 Mbps Ports
Ports
Ÿ
Ÿ
Ÿ Ÿ
Ÿ Ÿ
Ÿ Ÿ
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
5% to 95%
2000 m (6562 ft)
1.2 kg (2.7 lbs)
Notes
1000Base-LX
1000Base-Tx
MAC Bridges
VLAN (Virtual LAN)
Priority Levels
RUGGEDCOM RS930L
Installation Manual, 11/2022, C79000-G8976-1034-11