Mounting The Device On A Din Rail - Siemens SIMATIC NET RUGGEDCOM RS930L Installation Manual

Note
For detailed dimensions of the device with either DIN rail or panel hardware installed,
refer to
2.3.1

Mounting the Device on a DIN Rail

The RUGGEDCOM RS930L can be ordered with a DIN rail adapter preinstalled on the
back of the chassis. Use the adapter to mount the device to a standard 35 mm (1.4
in) IEC/EN 60715 or TS35 DIN rail.
Mounting the Device
To mount the device to a DIN rail, do the following:
1.
2.
RUGGEDCOM RS930L
Installation Manual, 11/2022, C79000-G8976-1034-11
"Dimension Drawings" (Page
Hook the top teeth of the adapter onto the DIN rail.
Note
The adapter features a sliding release with a slot at the bottom for a flathead
screwdriver.
1
DIN Rail
1
DIN Rail Adapter
2
Figure 2.1 Mounting the Device to a DIN Rail
Insert a flathead screwdriver into the slot of the sliding release and move it
down.
2.3.1 Mounting the Device on a DIN Rail
27).
3
Installing the Device
1
1
2
2
7