Connecting To The Push To Talk Service; Making A Push To Talk Call - Nokia 6260 User Manual

C a l l f u n c t i o n s
• Access point name
point name for the push to talk
service.
• Server address
server address.
• User name – Your user name
used to enter the push to talk
service.
• PTT password – Your password
used to enter the push to talk
service.
After modifying the settings, restart
the push to talk application.
Connecting to the push to
talk service
→ PTT.
Go to Menu
Alternatively, press and hold
a few seconds to connect to the
service.
The push to talk application
automatically attempts to connect
to the push to talk service. If the
login is successful, the push to talk
sessions view opens.
indicates the push to talk
connection. If you have added
group(s) to the phone, you are
automatically joined to the active
groups, and the name of the default
group is displayed in standby mode.
indicates that the service is
temporarily unavailable. The phone
automatically tries to reconnect to
the service until you disconnect from
the push to talk service.
14
– The access
– The push to talk
for
Copyright © 2004 Nokia. All rights reserved.
If the login fails, you get an error
note such as Unable to switch Push
to talk on. Press Options
Switch PTT on to try to log in again,
Settings to open the settings view,
or Exit to close the error note.
To disconnect from the push to talk
service, select Options
PTT off.
Options in the sessions view
are: Deactivate loudsp./Activate
loudsp., Active members,
contacts, PTT log, Settings, Help,
Switch PTT off, and Exit.

Making a push to talk call

→
Select Options
loudsp. / Activate loudsp.
either loudspeaker or earpiece for
push to talk communication. When
the earpiece is selected, you can use
the phone normally to your ear.
Warning: Do not hold the
device near your ear when
the loudspeaker is in use,
because the volume may be
extremely loud.
To make a push to talk call
1. Select Options
and search for a contact person
or a group.
To open the Push to talk groups
view, press
and select
→
Switch
PTT
Deactivate
to use
→
PTT contacts
.