Advertisement
Operation
Icon Function
A
Power
B
Heat
C
Temp
D
Flame Speed Press multiple times to toggle through flame speeds (minimum,
E
Color Theme Press multiple times to change the media and flame base colors. This
F
Brightness
G
Flame
H
Timer
10
Description
Press to turn unit Off or On.
Unit Off
Press to turn everything Off. Press again to turn unit On with previous
settings.
Unit On
Press to turn unit On with previous settings.
- If the flame effect was On, the flame will turn on and the previous
heat setting will be activated (On or Off). Display will show
current heater temperature setting and after 2 sec displays the
room temperature.
- [remote only] If the flame effect was Off, the previous heat
setting will be activated (On or Off).
- [panel only] If the flame effect was Off, the flame will turn on and
the previous heat setting will be activated (On or Off)
Heat On
Press to turn heat On (indicated by 1 short beep). Display will show
current heater temperature setting and after 2 sec displays room
temperature. Use the Temp icon to change the heater temperature
setting.
Heat Off
Press to turn heat Off (indicated by 1 short beep).
NOTE: After the heater is switched off, the fan will continue on for 60
seconds before turning off.
Press multiple times to raise the heater temperature in 1
Display will show current temperature. Temperature range is 17
This feature is active whenever the heat is enabled.
medium, maximum). Display will show current speed number (F1, F2,
F3 respectively).
feature is active only when the flame effect is On. Display will show
theme (t0, t1, t2, etc.)
XHD28L, XHD26L or XHD23L (Log Unit) themes:
• Theme t0 - no flame
• Theme t1 - Natural (flame base off)
• Theme t2 - Red Highlights (flame base red/orange)
• Theme t3 - Blue Highlights (flame base blue)
Press to change the flame and logs brightness. Display will show b3,
b1, b2 respectively.
• High
• Low
• Medium
Press to turn the flame effect On. Press again to turn the flame effect
Off.
Press multiple times to change the sleep timer by 0.5 hr from 0.5 hr
to 8 hr before turning off. Press again, the remaining time on the timer
displays.
o
C increments.
-26
C.
o
o
Advertisement
