Message Options - Nokia 5100 User Manual

For example, press the star key four times to display the "w" (wait character).
Pause briefly and the wait character is inserted into the dialing string.
Available dialing codes are as follows:
* Bypasses a set of instructions.
+ Precedes an international telephone number.
p Pauses for 2.5 seconds before sending any numbers that follow.
w Wait. Your phone waits for you to press the talk key before it sends
any numbers or codes that follow.
Setup voicemail with dialing codes
1 At the start screen, press Names, scroll to 1-touch dialing, and
press Select.
2 Scroll to an empty 1-touch dialing slot and press Assign.
3 Enter your voice mailbox number, including the area code.
4 Enter the necessary codes using the information that you wrote
down earlier.
For example, if you pause for 5 seconds after connecting to voicemail,
enter p twice after the voice mailbox number, such as 2145551212pp.
5 Enter any remaining pauses, PIN codes, and other information that
allows you to listen to your messages, then press OK.
6 Enter a name (such as Voicemail) and press OK. A message appears in
the display confirming your 1-touch dialing location has been saved.
Now, to dial and listen to your voicemail, just press and hold the
assigned 1-touch dialing key at the start screen. No other keypresses
should be necessary to connect and listen to your messages.

• MESSAGE OPTIONS

Some or all of the options in the following table are available for text
messages, picture messages, multimedia messages, and e-mail.
[ 72 ]