Set Up Your Phone - Nokia 5100 User Manual

Press Swap to switch between the active call and the call on hold, Transfer
to connect a call on hold, and the end key to disconnect yourself from
all calls.

• SET UP YOUR PHONE

The HDB-4 is an optional accessory.
Connect the headset
1 Plug the headset plug into the
TM
Pop-Port
end of your phone.
2 Position the headset on your ear
as it appears in the illustration to
the right.
With the headset connected, you
can make, answer, and end calls
as usual.
Use the keypad to enter numbers.
Press the talk key to place a call.
Press the end key to end a call.
Adjust display brightness
1 Press Menu 4-4-5 (Settings > Display settings > Display brightness).
After a brief pause, a bar chart appears in the display indicating the
current brightness level.
2 Press the left or right scroll keys to adjust the brightness to your
preference.
Change the Xpress-on
Important: Before changing the shells, always switch off the
power and disconnect the phone from the charger or any other
device. Always store the phone with the shells attached.
connector at the bottom
TM
[ 30 ]
shells