Table of Contents
Advertisement
WLM1200-RMTS™ User Guide
Using The Command Line Interface
The CLI presents a prompt with the platform name, which in our example above is rm200a1.
This prompt looks like this:
rm200a1 >
When in enabled mode, this prompt changes to the following:
rm200a1 #
CLI Commands
The CLI for this device includes a number of commands, as listed below from capture from an
WLM1200-RMTS, showing commands implemented and options for accessing them and getting help
regarding their use.
Login
login as: admin
Trapeze Networks WLM1200-RMTS Platform
Last login: Mon Dec 10 22:33:34 2007 from 172.21.26.220
Trapeze Networks WLM1200-RMTS Platform
Getting Help
rm200a1 # help ?
<cr>
rm200a1 # help
You may request context-sensitive help at any time by pressing '?'
on the command line.
This will show a list of choices for the
word you are on, or a list of top-level commands if you have not
typed anything yet.
If "<cr>" is shown, that means that what you have entered so far s a complete command, and you may
press Enter (carriage return) to execute it.
Try the following to get started:
?
show ?
show c?
show clock?
show clock ?
show interfaces ?
show ? Command
rm200a1 > show ?
bootvarDisplay installed system images and boot parameters
hostsDisplay hostname, DNS configuration, and static host mappings
imagesDisplay information about system images and boot parameters
terminalDisplay terminal parameters
versionDisplay version information for current system image
whoamiDisplay the identity and capabilities of the current user
6
Using The Command Line Interface
(from enable mode)
Copyright © 2011, Juniper Networks, Inc.
Advertisement
Table of Contents
