Table of Contents
Advertisement
Replacing the Roller ottoman motor
To replace the Roller ottoman motor:
- Follow the procedure 4 to 5 of Removing the Head rest, Back rest
cushion, Arm rest.
- Follow the procedure 2 to 3 of Removing the Under box and remove
the connector of the Roller ottoman(Sub circuit CN300 white).
4. Pull out the zipper ends connecting the Seat and the Ottoman, and
cut the Insulated tie, and unzip the zippers.
Cut the Insulated tie connecting the Ottoman pipe cloth and
Ottoman pipe,and pull down the Ottoman pipe cloth.
PDF created with pdfFactory Pro trial version
31
www.pdffactory.com
Advertisement
Table of Contents
