Panasonic EP1061-P1 Service Manual page 20

7. Cut off the Insulated ties and remove five screws and disconnect
the Intensity driving block holding the Width motor.
8. Cut off the Insulated tie and unscrew a screw on the Up/down
sensor plate and remove the Up/down sensor plate.
- When you take off the Massage mechanism block directly
9. Unscrew a screw and take off the Width revolution sensor.
PDF created with pdfFactory Pro trial version
from the chair, be careful not to damage the Up/down sensor,
which may hit the edge of the Back frame.
20
www.pdffactory.com