Panasonic EP1061-P1 Service Manual page 22

this condition, you can take off the Kneading ball block.
13. Unscrew two screws and remove the Up/down driving block.
9.4. Assembly
9.4.1. Adjustment of the Up/down sensor gear
When the massager is removed from the chair, the position of the up/down detection gear
changes, resulting in a change of the up/down stop position.
When installing the massager on the back frame, be sure to adjust the position with the up/down
detection gear.
Up/down detection gear position adjustment procedure
To make an adjustment, refer to the massager removing method (the back frame is tilted from the
chair).
1. Before mounting, the massager on the back frame must be moved
down to the lowest position by setting the controller manual
PDF created with pdfFactory Pro trial version
22
www.pdffactory.com