Multiplayer Game Play; Changing The Faceplate; Battery Pack Replacement - Nintendo Game Boy Micro User Manual

Using the Game Boy micro (Cont.)
5. When finished playing, first turn the power off and
then slide the Game Pak out of the Game Boy micro.
NOTE: To avoid dirt or dust from getting into the Game
Boy micro, always leave a Game Pak loaded (with the
power off), when not in use.
IMPORTANT GAME PAK GUIDELINES:
• Always check the Game Pak edge connector for
foreign material before inserting it into the Game
Pak Slot.
• Be sure to orient the Game Pak correctly before
inserting it into the Game Pak Slot.
• Do not turn the power off or remove the Game Pak
while saving game data, or the save data may be
lost.
16
Multiplayer Game Play (Cont.)
IMPORTANT: Be sure to check the Game Pak packaging and read the Game Pak
instruction booklet for the game you are playing to see if you need more than one
copy of the game to play multiplayer games, and to see how many players can play
simultaneously.
Multiplayer features and set-up methods will vary from game to game. Please read the
Game Pak instruction booklet for the game you are playing for features and correct set-up
information.
• Multiplayer connection using the Game
Boy micro Wireless Adapter. You can
communicate with either Game Boy
Advance or Game Boy Advance SP
systems that are using Game Boy
Advance Wireless Adapters.
Game Boy micro
Wireless Adapter
18

Changing the Faceplate

You can change the look of your Game Boy micro by changing the faceplate.
IMPORTANT: To protect the LCD Display
Screen, always keep a faceplate attached to
the Game Boy micro.
1. Insert the Faceplate Ejector tool into the
ejector holes on the left side of the Game
Boy micro. Remove the faceplate.
2. Insert the tabs on the right end of the new faceplate into the slots on the inside of the
Game Boy micro and snap the left end of the faceplate into place (see below.)
20

Multiplayer Game Play

Multiplayer game play is possible using one of the following methods:
1. Game Boy micro Wireless Adapter - communicate with either another Game Boy
micro using a Wireless Adapter, or with a Game Boy Advance that has a Game Boy
Advance Wireless Adapter attached (see page 18).
2. Game Boy micro Game Link cable - Link up with other Game Boy micro systems (see
page 19).
3. Game Boy micro Converter Connector - Used with a Game Boy micro Game Link
OFF
cable, you can link up with another Game Boy Advance or Game Boy Advance SP (see
page 19).
(See pages 18 and 19 for a description of Game Boy micro multiplayer accessories.
ACCESSORIES ARE SOLD SEPARATELY. Go to Nintendo's web site at
www.nintendo.com (USA/Canada only) or call Customer Service at 1-800-255-3700
to order.)
WIRELESS ADAPTER
COMPATIBLE
Multiplayer Game Play (Cont.)
• Multiplayer connection using the
Game Boy micro Game Link cable.
• Multiplayer connection using both
the Game Boy micro Game Link
cable and Game Boy micro
Converter Connector. Connect to
either a Game Boy Advance or
Game Boy Advance SP.

Battery Pack Replacement

Do not remove the battery from the Game Boy micro
unless it needs to be replaced. Please review the
instructions included with the replacement battery
pack before installation.
1. Make sure the power is turned OFF. Remove the
battery cover, using a small (#0) Phillips head
screwdriver.
2. Remove the battery pack from the battery
compartment and carefully unplug the battery
connector from the Game Boy micro.
3. Carefully plug the connector from the new battery
into the socket.
4. Replace the battery pack and battery cover.
IMPORTANT: The battery pack must be charged
after installation. (This will take approximately
2-1/2 hours). Please review pages 11-14 for
information on charging the battery pack.
You must be using Game Boy Advance Game Paks that feature
either linked or wireless multiplayer game play. Look for these icons
on Game Paks that include this feature.
Game Boy micro
Game Link Cable
Game Boy micro
Game Link Cable
17
Game Boy micro
Converter Connector
19
21