Bosch WAN282A2 Use And Assembly Instructions page 53

disturbance
Program starts
not.
Door cannot be opened
nen.
The detergent solution does not come out. Drain pipe or water drainage hose is blocked.
pumped out.
Cause and troubleshooting
Door is not closed.
Close the door.
1.
To start the program, press Begin /
2.
Reload.
Child lock is activated.
→ " Deactivating childproof lock ", page 41
▶
Completed in is activated.
check if Completed in is activated.
▶
→ "Keys", page 24
Laundry is jammed in the door.
Open the door again.
1.
Remove jammed laundry.
2.
Close the door.
3.
To start the program, press Begin /
4th
Reload.
- - - is activated.
Continue the program by pressing Sluice
▶
change or Pumping out choose and Start / reload
gene to press.
→
"Continuing the program at Rinse Hold", page 40
Temperature is too high.
Wait until the temperature has dropped.
▶
→ " Abort program ", page 40
▶
The water level is too high.
Start the program Pumping out.
▶
Power failure.
Open the door with the emergency release.
▶
→
"Emergency release", page 59
Clean the drain pipe and water drain
▶
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
Make sure the drain pipe and the
▶
The water drainage hose is not kinked or trapped.
The drain pump is blocked.
→ " Cleaning the drain pump ", page 46
▶
- - - is activated.
Troubleshooting de
53