Bosch WAN282A2 Use And Assembly Instructions page 48

de Cleaning and care
Insert the maintenance flap and
5.
snap into place.
Close the maintenance hatch.
6th
16.6 Clean the water drainage
hose on the siphon
If the water drainage hose on the
siphon is dirty or the detergent
solution is not pumped out, you must
clean it.
Switch off the device.
1.
Disconnect the device's power plug
2.
from the power supply.
Loosen the hose clamp and
3.
carefully pull off the water
drainage hose.
Residual water can run out.
48
2
1
1
Clean the water drainage hose
4th
and the siphon socket.
5.
16.7 Clean the filters in the
water inlet.
Empty the water inlet hose
To be able to clean the filters, first
empty the water inlet hose.
Turn off the tap.
1.
Set a program, except
2.
Rinse spin or Pump out.
Start the program and let it run for
3.
about 40 seconds.
Switch off the device.
4th
Disconnect the device's power plug
5.
from the power supply.