Epson SC-P600 Service Manual page 63

SC-P600
 The recommended air temperature range for printing a Calibration Chart is 15 degrees
to 28 degrees.
 The contents of the color chart differ between the User Mode and the Service Mode. (No
row or column numbers of the patches are printed in the Service Mode, but the nozzle
check pattern is printed instead.)
11. Confirm there is no dot missing in the nozzle check pattern on the bottom of the color chart. If any are found,
run a cleaning from the panel menu on the printer, and then click "Print again".
12. After drying is complete (after 5 minutes has passed), click Next to go to the measurement window.
Adjustment
Epson ColorBase2 Chart 1of1 Model:SC-P600
SelectedInk:Photo Black PrintDay&Time:Oct. 06 2014 14:27
Figure 2-32. Illustration of Calibration Chart (Service Mode)
Figure 2-33. Drying the Chart
Details of Adjustments
Serial:XXXXXXXXXX
5 min. later
256 calibration patches
Product name, serial no.,
selected black ink, print date
Nozzle Check Pattern
Active in 5 min.
SE Group Confidential (Related Staff Only)
Revision D
63