Table of Contents
Advertisement
About This Manual: This manual is made for the sole purpose of providing necessary information in order that a
serviceperson qualified by Epson performs his / her appropriate repair / maintenance for the applicable Epson's
products. You shall not use this manual out of this purpose.
This manual is Epson's confidential information. When you use this manual, you shall hold it in strict confidence
and shall not disclose to any third party without prior consent of Epson.
This manual, consists of the following chapters, is intended for repair service personnel and includes information
necessary for properly performing maintenance and servicing the product.
CHAPTER 1. DISASSEMBLY / REASSEMBLY
Describes the disassembly/reassembly procedures for main parts/units of the product, and provides the
standard operation time for servicing the product.
CHAPTER 2. ADJUSTMENT
Describes the required adjustments for servicing the product.
CHAPTER 3. MAINTENANCE
Describes maintenance items and procedures for servicing the product.
CHAPTER 4. APPENDIX
Provides the following additional information for reference:
•
Power-On Sequence
•
Connector Diagram
Various symbols are used throughout this manual either to provide additional information on a specific topic or
to warn of possible danger present during a procedure or an action. Pay attention to all symbols when they are
used, and always read explanation thoroughly and follow the instructions.
Indicates an operating or maintenance procedure, practice or condition that, if not strictly observed,
could result in serious injury or loss of life.
Indicates an operating or maintenance procedure, practice, or condition that, if not strictly observed,
could result in bodily injury, damage or malfunction of equipment.
May indicate an operating or maintenance procedure, practice or condition that is necessary to
accomplish a task efficiently. It may also provide additional information that is related to a specific
subject, or comment on the results achieved through a previous action.
For Chapter 1 "Disassembly/Reassembly", symbols other than indicated above are used to show additional
information for disassembly/reassembly. For the details on those symbols, see
Procedures
(p14)".
About This Manual
Symbols Used in this Manual
"1.2 Disassembly/Reassembly
SE Group Confidential (Related Staff Only)
Hide quick links:
Advertisement
Table of Contents
