Appendix A Dial Plan Interface Configuration; Figure A-1. Dial Plan Menus - ADTRAN 1200261L1 User Manual

Appendix A
Interface Configuration
USER TERM
>
» Ports Available
61200261L1-1
Dial Plan Interface Configuration
The User Term option for the Dial Plan menu sets the configuration param-
eters for the end point for the ATLAS Quad USSI Module. The Dial Plan
menus are only accessible when using terminal mode. To access these
options, select Dial Plan from the top-level menu (see Figure A-1).
This section describes the Dial Plan / User Term configuration settings for
the ATLAS Quad USSI Module.
The USSI can only serve as a User Termination end point.
When working in the User Term section of the Dial Plan and Slt (Slot) is
defined as a USSI module, the following configuration options are avail-
able:
Indicates which of the four ports of the ATLAS Quad USSI Module have
already been defined either in another switched end point (indicated by
"s") or in a Dedicated Map (indicated by "n"). This field is read-only.
ATLAS Quad USSI Module User Manual

Figure A-1. Dial Plan Menus

A-1