Configuration; Name; Clk (+/-); Data - ADTRAN 1200261L1 User Manual

CONFIGURATION

>
» Name
» Clk (+/-)
» Data
» CTS
» DCD
» DSR
» DTR
» 0 Inh
» Inband
» Send Leads
61200261L1-1
Configures the ATLAS Quad USSI Module.
Write security: 3; Read security: 5
Allows you to enter a descriptive alpha-numeric name for each port.
Write security: 3; Read security: 5
(TX Clock Polarity) Controls the clock used by the ATLAS Quad USSI Mod-
ule to accept the transmit (TX) data from the DTE. This is usually set to Nor-
mal . If the interface cable is long, causing a phase shift in the data, the clock
can be set to Inverted . This setting switches the phase of the clock, which
should compensate for a long cable.
Write security: 3; Read security: 5
(Data Format) Inverts DTE data. This inversion can be useful when operat-
ing with a high-level data link control (HDLC) protocol (often used as a
means to ensure 1s density). Select either Normal or Inverted .
Write security: 3; Read security: 5
(Clear to Send) Controls characteristics of CTS (see Table 3-1). Choose from
Normal or Forced On .
Write security: 3; Read security: 5
(Data Carrier Detect) Indicates to the DTE when a valid signal is being
received at the Network Interface (see Table 3-1). Choose from Normal or
Forced On .
Write security: 3; Read security: 5
(Data Set Ready) Indicates to the DTE when the DCE is turned On and
ready for operation (see Table 3-1). Choose from Normal or Forced On .
Write security: 3; Read security: 5
(Data Terminal Ready) Determines whether the ATLAS_800 treats a connec-
tion as permanent ( DTR=Ignore ) or temporary, connecting only when DTR
is active, ( DTR=Connect On DTR ). Select either Ignore or Connect on

DTR .

Write security: 3; Read security: 5
(Zero Inhibit) Instructs the ATLAS 800 to send 1s toward the network when
the port detects an uninterrupted string of 0s transmitted for more than one
second.
Write security: 3; Read security: 5
Creates an 8 kbps management channel by robbing a bit from the first DS0
assigned to the port. This channel can manage remote ADTRAN products.
Write security: 3; Read security: 5
Sends the state of the DTE leads to the remote unit whenever any DTE lead
changes state. See the online help menus for more information.
ATLAS Quad USSI Module User Manual
Chapter 3. Operation
3-7