Maintenance; Warning - Ryobi RHS01 Operator's Manual

 Unplug the power cord or remove the battery pack from
the rotary tool.
 If applicable, loosen the coupler on the hobby station and
remove the rotary tool from the tool carrier.
 Gently pull up on the tool hanger and cord holder to lift
the inner tube up and away from the column.
 Extend the inner tube until the tool hanger is at your
desired height.
 Twist the inner tube to lock it in place.

WARNING:

When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
OPERATION
 Securely place a rotary tool with flex shaft onto the tool
hanger. Refer to the rotary tool operator's manual for
instructions on hanging the tool. Improperly hung tools
can create a falling hazard.
 Operate the rotary tool with flexible shaft according to
the tool manufacturer's instructions.
 When operation is complete, turn the rotary tool off and
remove it from the tool hanger.

MAINTENANCE

To avoid serious personal injury, always remove the
battery pack from the product when cleaning or
performing any maintenance.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal injury.
9 - English
WARNING:
WARNING: