Advertisement
Calibration Functions:
Side Car (Bulk Brew): Put a container underneath brew basket. Push the Classic button (Calibrate).
Enter pump speed from 10 through 20 by using the left (Mild) or right (Dark) arrow. Pump speed of 16 is
the recommended default. Push the Classic button (Done). At this point, the Side Car will run for 1
minute delivering water into the container placed underneath the brew basket. Once this cycle has fin-
ished, remove the container and measure the amount of water. Next, input the "Measured Amount" of
water by pushing the Mild (-) or Dark (+) button to the measured volume. Push the Classic (Done) but-
ton and the calibration process is finished for the Side Car. Next prompt will be the Coffee Pod Holder.
1. Put brew basket and carafe in place
2. Press "Classic" button to begin calibration
3. Enter pump speed by using the "Mild" or
"Dark" (10-20)
(16) is recommended
4. Push the "Classic" button. Side Car will run
for 1 minute delivering water into container
5. Measure Volume of water in fluid ounces
6. Input measured amount by Pressing the
"Mild" or "Dark" buttons
Scroll up or down to set the measured volume.
7. Press the "Classic" button and the Side Car
calibration is complete. Prompting to "Coffee
Pod "
Side Car Brew
(? ) (CAL) (? )
Speed = 16
(-) (Done) (+)
Calibrating: = 0:59
Press any button to abort
Measure Volume of water
Amount = 15oz
(-) (Done) (+)
Amount = 19oz
(-) (Done) (+)
(X)
(X)
Press to Calibrate
(X)
-
Done
(X)
-
Press to finish
+
+
5
Advertisement
