Advertisement
Installing the light bulb & glass shade
WARNING: Shut off the power supply before removing or
replacing lamp.
1.Connect the wire connector from the fan to the lamp, then
install the lamp (22W) to the light plate using the 3 lamp
holders to prop up the lamp. Be sure to pull the lamp holders
out a little for installing the lamp easier. (Fig.16)
2.
Place the glass shade over the light holder and secure it with
the screws provided. (Fig. 16)
NOTE: Light bulb have no warranty, can be purchased at local light
bulb specialty store or from our service center.
9.
Light holder
Figure 16
Lamp
holder
Lamp
Wire
connector
Screws
Glass shade
Advertisement
