Advertisement
SUPPLY CIRCUIT
Outlet box
Black (hot)
Black ("AC IN L")
Receiver
Black ("to motor L")
White ("to motor N")
Blue ("for light")
Ground
(green)
Blue (light)
Black (motor)
Fan
Figure 10
Finishing the Installation
Step 1. Tuck connections neatly into ceiling
outlet box.
White (neutral)
Green or bare
Step 2. Slide the canopy up to ceiling and
copper (ground)
over the 2 screws on the hanger bracket.
White ("AC IN N")
Rotate canopy clockwise. Next, while
holding the canopy with one hand, slide the
canopy cover over the screws and rotate
clockwise until tight. Note: adjust the canopy
screws as necessary until the canopy and
canopy cover are snug. (Fig. 11)
(Connect to
ground wire on
hanger bracket
if no house
ground wire
exists.)
Make sure the notch on the hanging
White (neutral)
bracket properly sits in the groove in the
hanger ball before attaching the canopy to
the bracket by turning the housing until it
WARNING
drops into place.
Outlet box
Hanger
bracket
Canopy
cover
Figure 11
Screws
Canopy
6.
Advertisement
