Advertisement
4 Way Cassette Wind-Free Panel
If the Wind-Free function is not visible on the higher-
level controller after connecting the Wind-Free panel:
• Check if the software of the higher-level controller is
the latest version.
• If the software is not the latest version, update to the
latest version.
• If the software of the higher-level controller is the
latest version but the Wind-Free function is not visible
on it, perform tracking again on the higher-level
controller or reset its power.
※ H igher-level controller: DMS, Touch Centralized
Controller, Wi-Fit kit, or other device
Accessories
Item
Bolt (M5xL35 MACHINE)
Shape
NOTE
• If the supplied bolt is lost, you may purchase M5
machine bolt (with length of the thread more than
20 mm long) and a circular washer from any retail
hardware store to replace the lost bolt.
• Tightening torque for the M5 screw: 2.0 to 3.0 N∙m (20
to 30 kgf∙cm)
CAUTION
• After installing the product, be sure to explain to the
user how to use the air conditioner.
Installing the panel
CAUTION
• Handle the panel carefully.
• Do not lean the panel against a wall or place it on a
protruding object.
Failing to do so may damage the surface of the panel.
• Be careful when installing the air inlet panel by hand.
You may get hurt.
2
English
1 Open the electrical component box cover.
• After untightening the screws, slide the electrical
Installation manual
2 Pull both hooks in the direction of carved arrows and
• Hooks are located below the Samsung logo on the
component box cover in the direction of the arrow as
shown in the figure and pull it down.
take the grille to open.
grille.
Advertisement
