Advertisement
4 Way Cassette Wind-Free Panel
If the Wind-Free function is not visible on the higher-
level controller after connecting the Wind-Free panel:
• Check if the software of the higher-level controller is
the latest version.
• If the software is not the latest version, update to the
latest version.
• If the software of the higher-level controller is the
latest version but the Wind-Free function is not visible
on it, perform tracking again on the higher-level
controller or reset its power.
※ H igher-level controller: DMS, Touch Centralized
Controller, Wi-Fit kit, or other device
Accessories
Item
Bolt (M5xL35 MACHINE)
Shape
NOTE
• If the supplied bolt is lost, you may purchase M5
machine bolt (with length of the thread more than
20 mm long) and a circular washer from any retail
hardware store to replace the lost bolt.
• Tightening torque for the M5 screw: 2.0 to 3.0 N∙m (20
to 30 kgf∙cm)
CAUTION
• After installing the product, be sure to explain to the
user how to use the air conditioner.
Installing the panel
CAUTION
• Handle the panel carefully.
• Do not lean the panel against a wall or place it on a
protruding object.
Failing to do so may damage the surface of the panel.
• Be careful when installing the air inlet panel by hand.
You may get hurt.
2
English
CAC_EU_Wind-Free_Mini 4way Panel_IM_EN_DB68-07693A-00.indd 2
1 Open the electrical component box cover.
• After untightening the screws, slide the electrical
component box cover in the direction of the arrow as
shown in the figure and pull it down.
Installation manual
2 Pull both hooks in the direction of carved arrows and
take the grille to open.
• Hooks are located below the Samsung logo on the
grille.
2017-12-12 오후 2:10:07
Advertisement
