Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102
3. Enable the SysLog option if you have a SysLog server on your LAN. If enabled, you must
enter the IP address of your SysLog server and the port number your SysLog server is
configured to use.
•
SysLog Server IP address: The access point will send all the SysLog to the specified IP
address if SysLog option is enabled. Default: 0.0.0.0
•
Port: The port number configured in the SysLog server on your LAN. Default: 514
Viewing General and Statistical Information
General Information
The General information screen provides a summary of the current WAG102 configuration
settings. From the main Menu of the browser interface, click General to view the System Status
screen, shown below.
Figure 4-3
Management
v1.0, September 2005
4-3