NETGEAR WAG102 Reference Manual page 48

Prosafe dual band wireless access point

Hide thumbs Also See for WAG102:

Table of Contents

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG102

WEP/WPA Settings 11a menu

Figure 3-12

3. Choose Open System or Shared Key authentication.

4. Select Data Encryption.

5. You can manually or automatically program the four data encryption keys. These values must

be identical on all PCs and Access Points in your network.

— Automatic - enter a word or group of printable characters in the Passphrase box and click

the Generate button. The four key boxes will be automatically populated with key values.

— Manual - enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F)

Select which of the four keys will be the default.

See

"Wireless Communications:" in Appendix B

options, as defined by the IEEE 802.11 wireless communication standard.

6. Click Apply to save your settings.

Note: If you use a wireless computer to configure WEP settings, you will be disconnected

when you click Apply. Reconfigure your wireless adapter to match the new settings

or access the wireless access point from a wired computer to make any further

changes.

3-26

WEP/WPA Settings 11b/g menu

for a full explanation of each of these

v1.0, September 2005

Basic Installation and Configuration

Table of Contents