Installation And Basic Configuration; Installation Overview - NETGEAR SC101 Reference Manual

This chapter describes how to install your Storage Central SC101 and set up basic connectivity on
your Local Area Network (LAN).

Installation Overview

Estimated Completion Time: 30 minutes.
These instructions will guide you through these three steps:
1. First, Install a hard disk, and connect the Storage Central SC101 to your network.
2. Next, Install the Storage Central SC101 software.
3. Now, Allocate SC101 disk space for each PC that will use the SC101.
When you finish the installation, your network will resemble this illustration.
Figure 3-1
Note: You must have an IDE hard disk, an Ethernet network with an available port,
DHCP must be running in the network, and you need to have either Windows XP (SP2) or
Windows 2000 (SP4) PCs to access the SC101.

Installation and Basic Configuration

v1.0, September 2005
Chapter 3
3-1