Table of Contents
Advertisement
Rack-Mount Setup
Use the rack-mount hardware included with your ReadyNAS 3220 or 4220 to install it in a
rack. Read the
Rack-Mount Precautions
DANGER:
A system with installed drives can weigh more than 80 pounds. To
avoid injury or damage to the equipment, perform the rack mount
installation with appropriate assistance.
Installation
Read these instructions in their entirety before you begin. Locate the shipping carton, remove
the rack-mounting kit, and prepare to work with it.
The rack-mounting kit contains two rail assemblies. Each assembly consists of two sections:
•
An inner fixed chassis rail that secures directly to the system's chassis
•
An outer fixed rack rail that secures directly to the rack itself
To install the system into a rack:
1.
Extend the rail assembly by pulling it outward.
2.
Press the release tab and separate the inner rail from the outer assembly.
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems
ReadyNAS 3220 and 4220
section in Appendix A.
23
Hide quick links:
Advertisement
Table of Contents
