Viewing Attached Devices; Viewing, Selecting, And Saving Logged Information - NETGEAR RangeMax DG834N Reference Manual

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual

Viewing Attached Devices

The Attached Devices menu contains a table of all IP devices that the wireless modem router has
discovered on the local network. From the Main Menu of the browser interface, under the
Maintenance heading, select Attached Devices to view the table, shown in Figure 5-6:
Figure 5-6
For each device, the table shows the IP address, Device Name if available, and the Ethernet MAC
address. Note that if the wireless modem router is rebooted, the table data is lost until the wireless
modem router rediscovers the devices. To force the wireless modem router to look for attached
devices, click the Refresh button.

Viewing, Selecting, and Saving Logged Information

The wireless modem router will log security-related events such as denied incoming service
requests, hacker probes, and administrator logins. If you enabled content filtering in the Block
Sites menu, the Logs page can show you when someone on your network tries to access a blocked
site. If you enabled e-mail notification, you will receive these logs in an e-mail message. If you do
not have e-mail notification enabled, you can view the logs here.
5-10 Managing Your Network
v1.0, May 2006