How To Configure Static Routes - NETGEAR RangeMax DG834N Reference Manual

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
In this example:
• The Destination IP Address and IP Subnet Mask fields specify that this static route applies to
all 134.177.x.x addresses.
• The Wireless Modem Router IP Address fields specifies that all traffic for these addresses
should be forwarded to the ISDN router at 192.168.0.100.
• The metric value represents the number of routers between your network and the destination.
This is a direct connection so it can be set to the minimum value of 2.
• Private is selected only as a precautionary security measure in case RIP is activated.

How to Configure Static Routes

1. Log in to the router at its default LAN address of http://192.168.0.1 with its default User Name
of admin, default password of password, or using whatever User Name, Password and LAN
address you have chosen for the router.
2. From the Main Menu of the browser interface, under Advanced, click Static Routes to view
the Static Routes menu, shown in
Figure 6-5
3. To add a Static Route:
6-10
Figure 6-5.
v1.0, May 2006
Advanced Configuration