Dhcp - NETGEAR RangeMax DG834N Reference Manual

Wireless adsl2+ modem router
Hide thumbs Also See for RangeMax DG834N:
Table of Contents

Advertisement

DG834N RangeMax NEXT Wireless ADSL2+ Modem Router Reference Manual
RIP-2 carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2
format.
RIP-2B uses subnet broadcasting.
RIP-2M uses multicasting.
Note: If you change the LAN IP address of the wireless modem router while connected
through the browser, you will be disconnected. You must then open a new
connection to the new IP address and log in again.

DHCP

By default, the wireless modem router will function as a DHCP (Dynamic Host Configuration
Protocol) server, allowing it to assign IP, DNS server, and default gateway addresses to all
computers connected to the wireless modem router's LAN. The assigned default gateway address
is the LAN address of the router. IP addresses will be assigned to the attached PCs from a pool of
addresses specified in this menu. Each pool address is tested before it is assigned to avoid
duplicate addresses on the LAN.
For most applications, the default DHCP and TCP/IP settings of the router are satisfactory. See
"Internet Networking and TCP/IP Addressing:" in Appendix B
information about how to assign IP addresses for your network.
Use Router as DHCP server
If another device on your network will be the DHCP server, or if you will manually configure the
network settings of all of your computers, clear the 'Use router as DHCP server' check box.
Otherwise, leave it selected.
Specify the pool of IP addresses to be assigned by setting the Starting IP Address and Ending IP
Address. These addresses should be part of the same IP address subnet as the router's LAN IP
address. Using the default addressing scheme, you should define a range between 192.168.0.2 and
192.168.0.254, although you may want to save part of the range for devices with fixed addresses.
The router will deliver the following parameters to any LAN device that requests DHCP:
An IP Address from the range you have defined
Subnet Mask
Gateway IP Address is the router's LAN IP address
Primary DNS Server, if you entered a Primary DNS address in the Basic Settings menu;
otherwise, the router's LAN IP address
Advanced Configuration
v1.0, May 2006
for an explanation of DHCP and
6-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dg834nv1 - rangemax next adsl2+ modem wireless router

Table of Contents