Procedure 3-5: Configuring The Softremotelt Full Client - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall

Procedure 3-5: Configuring the SoftRemoteLT Full Client

To configure a policy for a secure local wireless connection to the FVM318 firewall using the
SoftRemoteLT client, use the FVM318 configuration from
Connections" on page 3-13
1. Install the SafeNet SoftRemoteLT Full VPN Client
Note: If you have installed the SoftRemote Basic client, you must uninstall it before
installing SoftRemoteLT. During the uninstall process, you can choose to keep your
existing security policy, simplifying the configuration of SoftRemoteLT. In
SoftRemoteLT, you can configure multiple Security Policies, such as a policy for secure
local wireless connection to the FVM318 firewall and a policy for connecting remotely
from the Internet.
2. Open the Security Policy Editor.
To launch the SoftRemoteLT client, click on the Windows Start button, then select Programs,
then SafeNet, then Security Policy Editor. The Security Policy Editor window will appear.
Figure 3-22. SafeNet Security Policy Editor
Create a VPN Connection.
3.
3-18
and follow procedure below for configuring the full VPN client.
"Configure Basic IPSec Wireless
Wireless Configuration