Procedure 7-4: Configuring Static Routes - NETGEAR FVM318 Reference Manual

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
• A Metric value of 1 will work since the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is a
direct connection so it is set to 1.
• Private is selected only as a precautionary security measure in case RIP is activated.

Procedure 7-4: Configuring Static Routes

Log in to the firewall at its default LAN address of
1.
name of , default password of
admin
you have chosen for the firewall.
From the main menu of the browser interface, under Advanced, click on Static Routes to view
2.
the Static Routes table, shown below.
Figure 7-2: Static Routes Table
To add or edit a Static Route, follow these steps:
3.
Click the Edit button to open the Edit Menu, shown in
a.
Figure 7-3: Static Route Entry and Edit Menu
Advanced Configuration
http://192.168.0.1
, or using whatever password and LAN address
password
with its default user
Figure 7-3.
7-9