NETGEAR FVM318 Reference Manual page 55

Reference Manual for the Model FVM318 Cable/DSL ProSafe Wireless VPN Security Firewall
You will need to provide: A descriptive name for the connection; and the LAN address of the
FVM318 firewall.
From the Edit menu at the top of the Security Policy Editor window, click Add, then
a.
Connection. A New Connection listing will appear in the list of policies.
Figure 3-23. SafeNet Security Policy Editor new connection menu
Click and rename the New Connection list item to indicate that this is the policy for your
b.
local wireless connection, such as Wireless.
Select Secure on the right side of the Security Policy Editor window in the Connection
c.
Security box.
Select IP Subnet in the ID Type menu.
d.
Type 0.0.0.0 in the Subnet and Mask fields.
e.
Select All in the Protocol menu to allow all traffic through the VPN tunnel.
f.
Check Connect using Secure Gateway Tunnel.
g.
Select Any in the ID Type menu below the checkbox.
h.
Select Gateway IP Address in the box to the right of ID Type.
i.
Enter the LAN IP Address of the FVM318 firewall in the lower right box (usually
j.
192.168.0.1).
Wireless Configuration 3-19