Table of Contents
Advertisement
Preparing for Installation
This chapter describe how to prepare for the installation of the Cisco NCS 4201 at your site, and contains the
following sections:
•
•
•
Safety Guidelines
Before you begin the installation of the Cisco NCS 4201, review the safety guidelines in this chapter to avoid
injuring yourself or damaging the equipment.
In addition, before replacing, configuring, or maintaining the Cisco NCS 4201, review the safety warnings
listed in the Regulatory Compliance and Safety Information for the Cisco NCS4200 Series document.
The following sections describe the safety guidelines for the Cisco NCS 4201:
Standard Warning Statements
To see translations of the warnings that appear in this publication, see the Regulatory Compliance and Safety
Information for the Cisco NCS 4200 Series document.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to
ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit
should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting this unit in a
partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of
the rack. If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing
the unit in the rack. Statement 1006
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be accessed only
through the use of a special tool, lock and key, or other means of security. Statement 1017
Safety Guidelines, on page 13
Site Planning, on page 19
Receiving the Chassis, on page 28
2
C H A P T E R
Cisco NCS 4201 Hardware Installation Guide
13
Advertisement
Table of Contents
