Gsm7312 Rear Panel - NETGEAR ProSafe FSM7326P Hardware Installation Manual

Managed Layer 3 Switches FSM7326P, GSM7312, and GSM7324 Hardware Installation Guide
Table 2-2. GSM7312 LED Description (continued)
Status
10/100/1000M port

GSM7312 Rear Panel

The rear panel has a standard AC power receptacle for the supplied power cord.
Figure 2-4
2-4
Green: Switch is operating normally.
Yellow: Switch failed to boot up.
LINK (left)
• Green: Link in 1000 Mbps.
• Green: Link in 100 Mbps.
• Yellow: Link in 10 Mbps.
ACT (right)
• Solid green: Link up.
• Blinking green: Activity, sending or receiving a packet in link up
and full-duplex state.
• Off: No link is detected.
FDX/COL (full duplex/collision)
• Green: Full duplex.
• Solid yellow: Half duplex.
• Blinking yellow: Half duplex, collision.
v1.0, March 2006
Power receptacle
Introduction