Technical Specifications - NETGEAR ProSafe FSM7326P Hardware Installation Manual

This appendix provides technical specifications for the switches.
Table A-1. Technical Specifications
Feature FSM7326P
IEEE Network • 802.3 10BASE-T
Protocol and • 802.3u 100BASE-TX
Standards • 802.3z 1000BASE-SX
compatibility • 802.3ab 1000BASE-T
• 802.3x flow control
• 802.3af Power over
Ethernet
• Jumbo Frame (up to
9,216 bytes)
Interface • 24 RJ-45 connectors for
(Auto Uplink on all 10BASE-T and
RJ-45 ports) 100BASE-TX
• 2 RJ45 connectors for
1000Base-T
• 2 Small form-factor
pluggable (SFP) slots for
SFP gigabit fiber-optic
modules
• RS-232 console port
Performance • Forwarding modes: Store-
and-forward
• Bandwidth: 8.8 Gbps
• Network latency: Less
than 80 microseconds for
64-byte frames in store-
and-forward mode for
10 Mbps to 100 Mbps
transmission
Address database 8,000 media access control
size (MAC) addresses per
system

Technical Specifications

Technical Specifications
GSM7312
• 802.3 10BASE-T
• 802.3u 100BASE-TX
• 802.3z 1000BASE-SX
• 802.3ab 1000BASE-T
• 802.3x flow control
• Jumbo Frame (up to
9,216 bytes)
• 12 RJ-45 connectors for
10BASE-T, 100BASE-TX,
and 1000BASE-T
• 12 Small form-factor
pluggable (SFP) slots for
SFP gigabit fiber optic
modules
• RS-232 console port
• Forwarding modes: Store-
and-forward
• Bandwidth: 24 Gbps
• Network latency: Less
than 80 microseconds for
64-byte frames in store-
and-forward mode for
10 Mbps to 100 Mbps
transmission
16,000 media access
control (MAC) addresses
per system
v1.0, March 2006
Appendix A
GSM7324
• 802.3 10BASE-T
• 802.3u 100BASE-TX
• 802.3z 1000BASE-SX
• 802.3ab 1000BASE-T
• 802.3x flow control
• Jumbo Frame (up to
9,216 bytes)
• 24 RJ-45 connectors for
10BASE-T, 100BASE-TX,
and 1000BASE-T
• Four Gigabit Interface
Converter (SFP) slots for
SFP modules
• RS-232 console port
• Forwarding modes: Store-
and-forward
• Bandwidth: 40 Gbps
• Network latency: Less
than 80 microseconds for
64-byte frames in store-
and-forward mode for
10 Mbps to 100 Mbps
transmission
16,000 media access
control (MAC) addresses
per system
A-1