Fsm7326P Rear Panel; Gsm7312 Front Panel And Leds - NETGEAR ProSafe FSM7326P Hardware Installation Manual

Managed Layer 3 Switches FSM7326P, GSM7312, and GSM7324 Hardware Installation Guide

FSM7326P Rear Panel

The rear panel has a standard AC power receptacle for the supplied power cord.
Redundant power supply connector
Figure 2-2

GSM7312 Front Panel and LEDs

The following figure shows the front panel of the GSM7312. The front panel
contains LEDs, RJ-45 jacks, SFP module bays, and a console port.
LEDs
Figure 2-3
The following table describes the GSM7312 LEDs on the front of the
switch.
Table 2-2. GSM7312 LED Description
LED
Power
Introduction
RJ-45 jacks
Description
Green: Power supply is present and operating normally.
Off: Power supply is not present.
v1.0, March 2006
Power receptacle
SFP module bays Console port
2-3