Figure 7-29: Snmp Management: Trap Settings - NETGEAR GSM712 Installation Manual

Advanced> SNMP> Trap Setting
When on, the system will generate an SNMP trap upon a host authorization failure. This failure occurs when a host tries to gain access to the
system but the host's IP is not in the SNMP host table.
Authentication traps
Enable The system will generate a SNMP trap upon a host authorization failure
o
Disable The authentication traps will not be generated
o
All hosts in community strings with TRAP privileges will be notified when a trap condition occurs.

Figure 7-29: SNMP Management: Trap Settings

Page 87 of 105