The Firewall Router's Rear Panel; Connecting The Firewall Router; Figure 2-2. Fr314 Rear Panel - NETGEAR FR314 Reference Manual

Reference Guide for the Model FR314, FR318 and FV318 Cable/DSL Firewall and VPN Routers

The Firewall Router's Rear Panel

The rear panel of the FR314 is shown in
number of ports and the absence of an Uplink switch. Refer to this diagram to identify the firewall
router ports before attempting to make any connections.
Figure 2-2. FR314 Rear Panel

Connecting the Firewall Router

Before using your firewall router, you need to do the following:
• Connect your local Ethernet network to the LOCAL port(s) of the firewall router (described
next).
• Connect your cable or DSL modem to the INTERNET port of the firewall router (see
2-6).
• Connect the power adapter (see
2-4
Figure 2-2. The FR318 and FV318 differ only in the
page 2-6).
page
Setting Up the Hardware